Detailed Product Description

explode-proof fluorescent light :

Due to the body in stainless steel AISI 304, a glass tempered window WF series are ideal for Onshore, Offshore, Marine applications and for all kinds of industry where a high level of corrosion resistance is required. Moreover, the shapes of WF lighting fixtures have been designed to allow the operator to work hands-free with no need to support any part of lighting fixtures. One person can take care of start-up or maintenance of a WF lighting fixture without any aid or assistance.

Specifications
IP Rating: IP65
ExplosionProof execution: Industrial waterproof
Ex-code: IP 65 CLASS I
Operating Temperature: -30°C / 55°C
Standards: Compliance with Electromagnetic Compatibility (EMC) according to European Directive 89/336/EC
Reflector: Specular aluminum reflector
Material: Stainless Steel AISI 304, 0.7mm thickness and transparent part in tempered glass
Gaskets: Special cross section tightness gasket, silicon rubber made (close cells) located in housing channel between body and glass.
Entries: Body complete of two diam. 21mm through holes for cable entries, one complete of metallic plug with lock nut and gasket, and the other one with plastic plug for dust protection.
Hardware and Screw: AISI 304 Stainless Steel external hardware and screws
Lamps: WF Series is suitable for two pins fluorescent lamps G13 socket PHILIPS TL-D
Lamps Wattage: 58W
Ballast Electromecanichal ballast
Rated operation voltage 220 V
(UE)
Frequency: 60Hz
Power factor: > 0,9
Accessories : Wiring with High frequency electronic ballast (220-240V 50/60 Hz.)
Available upon request: Suspension mounting kit G1 AISI 304 made Pole mounting kit P12 1 ½ size AISI 304 made Wall mounting kit H1 AISI 304 made
Packing size:167*18.5*14.5CM
APPLICATIONS:
Laboratory Applications Hose / washdown Petroleum/petrochemical solvent / cleaning Maintenance pits Oil drilling rigs Machining/fabricating Paint / finishing booths



Note : Very low pollution at the end of operative life time of lighting fixtures. The inorganic materials used for WF, like stainless steel and glass, allow a recycle of 95%, only electrical components and insulation of single core wires need some more care. No through holes between inside and outside of luminaries, out of holes for mounting and power supply cable whatever protected by a suitable waterproof cable gland (on request). Therefore, during the time, release